Adjust the output of your pond pump perfectly to your needs

When you have a waterfall or filter, you want it to continuously receive the right amount of water from your pump. It can sometimes be difficult to properly adjust the output with a regular pump. By taking an adjustable pond pump, you can very easily use a control box or controller to adjust your pond pump perfectly for the output you need.

Provides an output of 7,500-15,000 liters

The BluFlow 15,000 adjustable pond pump can be set in 10 steps to an output of 7,500 to 15,000 liters. Hereby, it has a maximum head of 2.3 to 7.0 meters. The actual output can be reduced by fouling, hose thickness, hose length and height. Because the pond pump's capacity is adjustable, you can increase it again should the capacity decrease.

Save energy by reducing power to what you need

Because an adjustable pond pump allows you to reduce the power to exactly how much you need, you never use too much energy. This allows you to save energy costs on consumption in your pond.

Easy to open and maintain without unscrewing

The BluFlow adjustable pond pumps are easy to open without screwing. Thanks to a twist and lock system, you easily open the pump for cleaning and maintenance.

A purchase you can rely on for years

At BluGarda, we offer a 2+1 year warranty on the BluFlow adjustable pond pump. In addition, BluGarda has its own repair service. For minor defects we can (often free of charge) repair the pond pump. Well as sustainable.

Easy installation and suitable for multiple hose sizes

The BluFlow Adjustable Pond Pump is easy to install. You can place it at the bottom of your pond on both the base and side of the pump. With convenient fold-out feet on the side, you can easily place it on its side. Make sure the pond pump is not placed directly in the mud at the bottom of your pond, this can damage the pond pump. The pond pump includes hose grommets for connection with 25, 32 or 40 mm hose sizes.

Output graph of the BluFlow 15,000 adjustable pond pump

In the graph below you can read the maximum output (liters per hour) and maximum head (meters) at a selected setting.